Real Ranges. No Login. No Calculator That Lies. Use This To Sanity-Check A Bid Or Set A Budget Before You Talk To Anyone.
Budget Planning Ranges - Not A QuoteThese Are Real-World Ranges For South Florida Custom Metal Fabrication, Not A Calculator. Every Number Assumes Miami-Dade Or Broward County Delivery With Standard Access. Use It To Sanity-Check A Bid, Set A Budget, Or Decide Whether A Design Direction Is Realistic Before You Commit.
If Your Project Is Below The Starting-At Number, We Are Probably Not The Right Fabricator. Ask Us Anyway - We Will Say So Honestly.
| Product | Starting At | Typical Range | What Drives Cost Up | Miami-Dade Notes |
|---|---|---|---|---|
| Glass Railings | $250/LF | $250 - $700/LF | Base Shoe Channel Vs. Standoff, Glass Thickness (1/2" Vs 3/4"), Post Spacing, Wind-Load Engineering, Curved Runs, Night Lighting, LED Handrail | HVHZ Engineering Required. Coastal Exposure Adds 316 SS Hardware. |
| Aluminum Railings | $170/LF | $170 - $395/LF | Picket Spacing (4" Code), Kynar Vs Powder Finish, Custom Profiles, Curved Runs, Integrated Gates, Mounting Condition | FBC 2023 HVHZ. NOA On Decorative Infill In HVHZ Zone. |
| Cable Railings Est. | $150/LF | $150 - $450/LF | Post Material (Aluminum Vs SS), Cable Diameter, Post Spacing, Corner Detail, Top-Rail Profile, Deflection Analysis | Deflection Engineering Critical In HVHZ. Marine Environment = 316 SS. |
| Aluminum Fences & Gates Est. | $65/LF | $65 - $180/LF | Height, Picket Density, Custom Scroll Or Pattern, Automated Gate Hardware, Decorative Caps, Footing Type | Perimeter Permit Required Miami-Dade. Automatic Gate Hardware NOA. |
| Aluminum Pergolas Est. | $45/SF | $45 - $120/SF | Column Count And Span, Louver Operability (Fixed Vs Motorized), Roof Drainage, Integrated Lighting, Structural Attachment | Full HVHZ Wind Engineering Required. NOA On Motorized Louvers. |
| Aluminum / Wood Louvers Est. | $35/SF | $35 - $90/SF | Blade Profile, Spacing, Backing Structure, Finish (Mill Vs Kynar Vs Wood-Look), Custom Perforation, Integrated LED | Miami-Dade HVHZ Engineering. Faux-Wood Finishes Hold Better Than Real Wood. |
| Custom Stairs | $1,500/EA | $1,500 - $4,500/EA | Cantilever Vs Stringer, Tread Material, Riser Count, Glass Or Cable Infill, Curved Vs Straight, Structural Connection | Signed And Sealed Engineering. HVHZ Exterior Stairs Need NOA-Referenced Hardware. |
| Steel Structures / Misc | $2.00/LB | $2.00 - $3.25/LB | AISC Certification Level, Coating (Paint, Galvanize, Powder), Site Access, Connection Complexity, Delivery + Rigging | Structural Steel Packages Typically Require Sealed Shop Drawings + PE-Of-Record Coordination. |
Est. = Internal Estimate Based On Standard Industry Ranges, Not A GOPELIA Project-Specific Quote. All Other Rows Are Sourced From Current Market Rate Research For South Florida Custom Metal Fabrication.
Value Engineering: Every Range Above Assumes A Baseline Spec. Material Substitution, Finish Downgrade, Simplified Profiles, Or Reduced Post/Panel Count Can Bring A Project Toward The Low End Or Below It. Ask Us About Value-Engineering Options Before You Rule A Project Out On Budget.
Because A Calculator Would Lie To You. In Miami-Dade, The Same Aluminum Railing Can Cost 2x Or 3x Depending On Whether It Needs A Miami-Dade NOA, Whether The Site Is In A High-Velocity Hurricane Zone, Whether Install Requires A Lift, And What The Actual Wind-Load Requirement Is. A Number Without Context Sets You Up For A Change Order Later. We Would Rather Have A 15-Minute Call And Give You A Real Range In Writing.